Auto Parts Search
We have info for following modifications of 1990 Ford Probe
- 1990 Ford Probe GL 2.2 L4 GAS, CID:133, Fuel Injection, Aspiration:133, Engine VIN:, Desg:C
- 1990 Ford Probe GT 2.2 L4 GAS, CID:133, Fuel Injection, Aspiration:133, Engine VIN:, Desg:L
- 1990 Ford Probe LX 3.0 V6 GAS, CID:182, Fuel Injection, Aspiration:182, Engine VIN:, Desg:U
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1990 Ford Probe cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1990 Ford Probe GT 2.2 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- On models equipped with manual transaxle, remove exhaust pipe bracket.
- On all models, remove transaxle to engine bracket.
- Remove intake manifold to engine bracket.
- Remove solenoid B+ terminal nut, then disconnect battery lead and S terminal electrical connector.
- Remove starter motor mounting bolts
- Remove starter motor from vehicle.
- Reverse procedure ...
CLICK HERE TO GET FULL ACCESS TO 1990 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1990 Ford Probe cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1990 Ford Probe GL 2.2 L4 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- On models equipped with manual transaxle, remove exhaust pipe bracket.
- On all models, remove transaxle to engine bracket.
- Remove intake manifold to engine bracket.
- Remove solenoid B+ terminal nut, then disconnect battery lead and S terminal electrical connector.
- Remove starter motor mounting bolts
- Remove starter motor from vehicle.
- Reverse procedure ...
CLICK HERE TO GET FULL ACCESS TO 1990 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1990 Ford Probe cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1990 Ford Probe GT 2.2 L4 GAS
- Disconnect battery ground cable,
- Remove catalytic converter.
- Disconnect wiring terminal from back of alternator. Stator and field wiring terminals are push on type.
- After depressing lock tab, push on type terminal should be pulled straight off to prevent damages.
- Loosen alternator adjustment bolt, then through bolt enough to allow alternator to pivot.
- Re...
CLICK HERE TO GET FULL ACCESS TO 1990 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1990 Ford Probe cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1990 Ford Probe LX 3.0 V6 GAS
- Disconnect battery ground cable.
- Remove accessory drive belt.
- Remove and set aside windshield washer reservoir.
- Remove power steering pump reservoir return hose from pump assembly.
- Remove power steering pump high pressure hose from pump assembly.
- Remove upper accessory support bracket mounting bolt.
- Remove middle accessory support bracket mounting bolt.
- Remove lower accessory support bracket mounting bolt.
- Remove attaching bolt from side of accessory support bracket at air cond...
CLICK HERE TO GET FULL ACCESS TO 1990 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1990 Ford Probe cars and light trucks from 1990+.
Starter, Replace
Vehicle: 1990 Ford Probe LX 3.0 V6 GAS
- Disconnect battery ground cable.
- Raise and support vehicle.
- Remove solenoid B+ terminal nut.
- Disconnect battery lead and S terminal electrical connector.
- Remove starter motor ...
CLICK HERE TO GET FULL ACCESS TO 1990 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
STARTER & ALTERNATOR REPLACEMENT PROCEDURES FOR 1990 Ford Probe AUTOMOBILES
Includes starter and alternator replacement procedures for domestic and imported 1990 Ford Probe cars and light trucks from 1990+.
Alternator, Replace
Vehicle: 1990 Ford Probe GL 2.2 L4 GAS
- Disconnect battery ground cable,
- Remove catalytic converter.
- Disconnect wiring terminal from back of alternator. Stator and field wiring terminals are push on type.
- After depressing lock tab, push on type terminal should be pulled straight off to prevent damages.
- Loosen alternator adjustment bolt, then through bolt enough to allow alternator to pivot.
- Re...
CLICK HERE TO GET FULL ACCESS TO 1990 Ford Probe STARTER & ALTERNATOR REPLACEMENT PROCEDURES
Shop online for auto body parts, engines, wheels, lights...
More parts |
Get the Complete Technical Service Bulletins! |
Access diagrams and repair information such as wiring diagrams, diagnosis and repair charts, manufacturer service bulletins, and OEM Part numbers of your 1990 Ford Probe vehicle. |
Access the Complete guide! |